;
伸;Be careful of bending that spoon.
当心别把汤匙弄
。
（bend的ing形式）
；抗矩；力矩；挠矩机试验半径；转半径应力角，角刚；刚力疲劳，挠疲劳；抗力；抗性能振动挠；滚筒加工
，伸；伸张能力模数；系数；热负
；载Be careful of bending that spoon.
当心别把汤匙弄。
poppies bending in the wind.
被风吹得倒的罂粟。
The sailors are bending to the oars.
水手们在拼命地划桨。
sailors were bending sails to the spars.
船员们把帆系在桅杆上。
He is bending down to tie his shoelaces.
他正下腰系鞋带。
The sun’s gravitation was bending the beam of light.
太阳的引力使光束。
Rheumatism prevents him form bending his back.
风湿病使他不能腰。
the frontage of the dentary forms a platform as a result of its bending;
齿骨前部由于形成一个平台；
bending strength and thermal shock resistance were improve by addictivity of Boron nitrid.
在该体系中引入氮化硼后,复合材料的和抗热震性能得到提高。
The induced bending moment may lead to destructibility of the pipeline.
矩的产生可能导致管线的破坏。
Ovalisation at maximum bending strain in the small scale reeling tests was not measured.
在小型的卷轴测试中基于最大应变的成椭圆形是没有规则的。
We have succeeded in bending the thick steel plates.
我们终于把这些厚钢板弄了。
Max has been bending my ear all night about his job.
马克斯一晚上都在对我大谈特谈他的工作。
Cross-section ovalization is one of the flaws in the thin-walled tube NC bending process.
截面畸变是薄壁管小半径数控成形容易出现的成形缺陷之一。
The combination of bending and overblowing technique makes it true to play all the semitones on a diatonic harmonca.
压音和超吹技术的结合使得在一把口琴上演奏所有的大小调梦想成真。
A young man was bending low to push a heavily loaded barrow up a slope.
一个年轻人正弓着背把一辆重载的小车推上斜坡。
In the end he admitted bending the truth. He had done some of his essay, but he hadn’t finished it.
最后他承认说的不完全是实话，他的文章是写了一部份，不过还没有完成。
The tarsal joint of the hind leg of a digitigrade quadruped, such as a horse, corresponding to the human ankle but bending in the opposite direction.
穿在脚上的一种遮盖物（踝以下），它包括由皮革或塑胶做的柔软的鞋帮与由较硬的材料做的鞋底和鞋帮组成。
3.The tarsal joint of the hind leg of a digitigrade quadruped, such as a horse, corresponding to the human ankle but bending in the opposite direction.
四足动物步法至少两只脚总是接触地面，尤指马的步法，四足以四拍的方式踏地，顺序为左后脚，左前脚，右后脚，右前脚
Through the analysis of the structure and technological process of the bottom crossband, a reasonable process for bending the pipe nip of the bottom crossband was determined.
通过对下横条的结构与工艺分析,确定了下横条管夹的合理的工艺方案,并设计了能够同时直边和管夹的模具,提高了生产效率,降低了生产成
声明：以上例句、词性分类均由互联网资源自动生成，部分未经过人工审核，其表达内容亦不代表本软件的观点；若发现问题，欢迎向我们指正。
