filler

these plants are attractive gap-fillers or ground cover.

这些植物用来填隙补缺或是作为地被植物倒很漂亮。

All fillers lowered the maximum exotherm.

所有填都降低放热应。

Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

应用领域：是广大石油、化工行业中转化炉、反应炉、填塔中最为理想的填。

It is assumed that the Rinser /Filler/Capper is fed by air conveyors.

它假设，冲洗机/填充机/封口机是由空气传送带传送。

According to the impact test, the addition of the filler could improve the epikote toughness.

通过对填充韧硅微粉的环氧树脂固化物的冲击试验，韧硅微粉对环氧树脂具有显的韧果；

For filler, we mixed epoxy wood rebuilder, following the manufacturer's instructions.

对于灌装机，我们环氧木重建者混合后，制造商的说。

Results showed that the oil removal effect of lipophilic filler is better than lipophobic filler, and the treatment processes can obtain satisfactory treatment effect without using any chemicals.

结果表,亲油性聚结填的除油果要好于疏油性填,水温与聚结负荷对除油率有较大影响。在不投加任何药剂的情况下,试验处理流程可将聚合物驱采油废水处理到理想果。

Filler retention and drainability of wheat shaw pulp could be improved remarkably when PAC and PDADMAC were added as ATC before the addition of CPAM.

用PAC和PDADMAC作为阴离子捕捉剂可显著改善麦草浆的滤水性，提高其留着率。

Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

用石膏模浇注法生产出含碳化硅和粒状填的耐热匣钵。

The vulcanization characteristics of a silicone rubber foam made by technology of removing inert filler used as foaming agent was investigated with curometer.

采用橡胶硫化仪研究溶析成孔工艺制备的硅橡胶泡沫材的硫化特性,分析讨论硅橡胶的结构、成孔剂用量对硫化特性的影响规律。

A series of reversible thermochromic paints were prepared using different kinds of inorganic compounds as filler,cresol red as chromophoric reagent and boric acid as delomorphic reagent.

以甲酚红为发色剂,硼酸为显色剂,选择不同的无机填,制备出系列可逆热致变色颜。

The test results showed that the Mooney viscosity,mixing behavior and curing rate increased,and the filtering and extrudability improved by blending EPDM and an elastic filler in the test compound.

试验配方中并用EPDM和弹性填充剂,胶门尼粘度、硫化速度和混炼性能得到提高,过滤和挤出工艺性能得到改善。采用试验配方生产的自行车内胎性能良好,达到国家标准要求;

The ultraviolet irradiated polypropylene (PP) with the oxygen polar groups on its chain was blended with the inorganic filler STC (Sericite-Tridymite-Cristobalite).

聚丙烯在室温、空气下,通过低能、短时间的紫外光辐照,在其分子链上引入含氧的极性基团。