generating

generating power from waste.

用垃圾发电。

the company aimed to double its electricity-generating capacity.

这家公司目标是使电力生产翻两番。

There are many ways of generating a two-dimensional representation of an object.

有很多制作物体二维方法。

The main hydrocarbon-generating macerals in the source rocks of the coal measures are exinite, alginite and desmocollinite.Organic matter is dominantly of type III kerogen.

煤系烃源岩中主要烃显微组分是壳质体、藻类体、基质镜质体等,有机质类型以Ⅲ型为主;

In addition, a generating mesh method is used to divide the stator end winding evolvent model.This method is good meet the actual structure of stator end winding.

并给出了定子绕组端部渐开线模型网格生方法，利用该方法能准确模拟电机端部绕组情况；

A responsibility center is any point within an organization where control over the incurrence of cost or the generating of revenues is found.

责任中心即在某一企业内能控制本发生或收入产生任何点。

The bacteria in your large intestine eat your unwanted dead cells, and mucins (which are part of the mucus lining of your gut), so generating useful chemicals and waste gases.

当血液流经肠道时，血液中二氧化碳也会泄漏出去。

The sapropel-type organic matter evolution need higher temperature and biger depth and its main gas generating zone is deeper than humic-type organic matter's.

腐泥型有机质演化需要更高活化能，而需更高温度和更大深度，其生气主带深于腐殖型有机质源岩层位置。

Aimed at the problem of lamellar tearing in the welding of bakie, generating cause of lamellar tearing was analyzed from the product structure and welding procedure etc.

针对中间包焊接时产生层状撕裂问题,从产品结构、焊接工艺等方面分析了层状撕裂原因,并制定相应工艺措施,避免了层状撕裂产生。

Based on the emission, absorption, diffusion, reflection and scatteration of light by a voxel, it is suitable for generating and rendering realistic images of complex scenes.

基于体单元对光线发射、吸收、漫射、反射和散射基础上体放射法,适用于复杂景物生和演示,在真感形演示中具有重要地位。

The fluid was so hot that it made upper Ordovician palaeotemperature go up 50 ℃, and increased the hydrocarbon-generating rate of carbonate rock in Ordovician 32 times at least.

流体携带了大量深部热能，使奥陶系上部古地温升高约50℃，并将其中碳酸盐岩生烃速度提高了至少32倍。

The automatically generating program of the geometrical locus and numerical control maˉchining program for the side light rivelling were developed to solve the inefficiency problem in maˉchining.

针对汽车车灯侧灯纹加工过程中效率低下问题,开发了侧灯纹轨迹曲线和数控加工程序自动生程序,现了侧灯纹加工自动化。