molding

The molding method,process,and the equipment of thermoset runnerless injection molding have been discussed in this paper.

论述了无流道热固性塑料注射成的方法、工艺、设备和模具设计方面的。

The company is possessing complete set of equipment of encapsulation molding blow moding and extrusion molding.

司地理位置优越、交通便利。

any low-fusing alloy used in cheoplasty (molding artificial teeth).

低熔点合金，用于低熔铸（假牙成）。

This entirely reflects the author's thinking pattern of hetero-topia in his molding the image of China.

这些都反映了作者构筑中国形象时采用的是异托邦思维模式。

The reason of gas-hole defects occured in steel casting for molding eroduction line was analyzed.

结合多年的生产实践,分析了湿砂水平造生产线上铸钢件产生气孔的原因,介绍了预防铸钢件气孔的措施。

He purchased L&W Tool in St.Charles and converted the toolmaker and molder to a precision molding shop.

他购买L黑白工具在圣查尔斯和转换的工具，并以精密模塑成车间。

Bulk Molding Compound with high strength material with excellent moldability and moderate strength.Used in multi-purpose applications.

玻璃纤维增强团状模塑料，高等强度和优异电性能，低成本，良好的成性。广泛应用于各种领域。

The specific properties of gypsum and its slurry, the effect of different refractories on the properties of plaster molding, and how to control main process of gypseous mold are analyzed.

在大量试验研究的基础上,阐述了有关石膏铸工艺的几个主要技术,分析了石膏及其浆料的特性,各种填加物对石膏性能的影响,以及如何控制石膏铸造的主要工艺过程

Exhumate the “customer mentality”, emotional resistance”, molding &colors and tactile preference of product in order to deeply explore the emotional elements of product contents.

发掘产品的“使用者心理”、“情绪反抗”、“造色彩”、“质感的偏好”以深入探讨产品语意间的情绪因素。

By using film laminated molding method,unidirectional high-modulus carbon fiber reinforced copolyimide composites were prepared.

采用膜层压方法,制备了单向高模碳纤维增强共聚聚酰亚胺复合材料;

Developed excogitates of two decumbence and one hovizoutal molding die, realized increasing height of branch pipe of heat pressure tee and reducing radius of synodical arc of tee.

研制出两套立式模具和一套卧式模具,实现了用工艺方法增加热挤压三通支管高度,缩小三通相贯区内拐角处圆弧半径的目的。

Straw, a kind of natural biodegradable material, was used as reinforced fibers for preparing nonrecurring biodegradable flowerpots by compression molding technology.

采用廉价的秸秆为增强材料,以淀粉为基材料,通过模压成制备出一次性可生物降解花盆。

Wind the crosslinked tape onto welded cable cores to certain size when connecting cables, and then use molding model to effect 0.6Mpa air pressure and a temperature of about 160℃ to sulfurate.

接头时用交联带一层层缠绕包覆在焊接好的电缆线上达到一定尺寸，再用成模具加0.6Mpa空气压力、160℃左右高温硫化成。

Methods of enhancing dispersing mixability in dynamic molding process,the structure of the dynamic mixing extruder and its operation principles were introduced.

介绍了基于动态成过程强化分散混炼的方法以及实现这些方法的动态混炼挤出机的结构及工作原理。

Beam side form shall be installed after all work inspected and accepted such as beam rebar work, cushion block laying, steel inserts installation, steel doweling and pocket molding bed, etc.

绑扎梁筋，垫保护层垫块，安放埋件、插筋、预留孔胎模等，经检查合格后扣梁侧模。