radius 四级六级GMAT考研

the operating radius of a helicopter.

直升飞机

We are measuring the radius of the circle.

我们正在测量圆。

with further outgrowth the radius and ulna develop.

随着长出过程进一步发展桡骨和尺骨发育了。

200mm Process minimum incurve radius: 150;

加工最小内弯：150;

Sharp corners should be radiused to prevent arc over.

这是所有剪裁下来片子。

The gate edges are radiused through the packing area.

闸板边缘以辐射状通过填料区域。

every family within a radius of 25 miles of the city center.

住在离城中心25英里范围内家庭

250mm Process minimum excurvation radius:200;

加工最小外弯：200;

They searched within a radius of one mile from the school.

他们在学校周围1英里内寻找。

The police searched all the fields and woods within a radius of two miles.

警察搜查了两英里范围内所有田野和森林。

A radius dimension line uses one arrowheaded, at the arc end.

标示线由箭头线和圆弧组成。

People used to measure the radius of nonplastic circular by the length of bowstrings in the geometric calculation .

在几何量测量中一直以弓高弦长等方法测量非整形圆弧值。

An automatic radiusing machine was developed to eliminate the burr or edge fin of bar end.

为了清除棒材在生产过程中产生端部毛刺、飞边等缺陷,研制开发了棒材自动倒角机。

The minimum underbalance is independent of viscosity and compressibility and of reservoir fluids.It is a function of the formation porosity, permeability and radius of perforation channels.

最小测试压差不是依赖于地层流体粘度和压缩性，而是为地层孔隙度、渗透率和射孔孔眼函数。

He has visited every shop within a radius of two miles.

周围两英里以内店铺他都去过。

When the Lanes joint a Plane curve,such as a clothoid or an arc with small radius,itll need repeatedly compute and adjust.

尤其是变速车道起点对应主线线形为圆曲线或缓和曲线时,往往反复试算调整,也难以得到比较理想设计方案。

Objective: To summarize the clinical effect of thrypsis of distal radius by the treatment of manipulative reduction combined with plaster drafting.

摘要目：总结手法复位配合石膏牵引治疗桡骨远端粉碎骨折临床效果。

The influence of the distances between anticathode and cathode and electrolysis voltages on the radius and depth of micro-dimples was investigated.

探讨了电解电压和阴阳两极之间间距对电解加工影响。

Then in the subspace，the hypersphere containing almost training data with minimum radius is found as decision hypersphere for novel detection.

在该子空间中，通过优化方法寻找包含训练数据最小超平面，为新颖检测决策界面。

In order to reduce the error in the calculation, this article raises a measure method to the radius of nonplastic circular arc which basis on the principle of geometry.

为了降低测量误差,提出了对非整形圆弧直测量方法。