1.All fillers lowered the maximum exotherm.

1.所有填料都降低放热效应。

2.For filler, we mixed epoxy wood rebuilder, following the manufacturer's instructions.

2.对于装机，我们环氧木重建者混合后，制造商的说明。

3.Thermoresistant saggers containing silicon carbide and granular filler were produced through slip casting in plaster mould.

3.用石膏模浇注法生产出了含碳化硅和粒状填料的耐热匣钵。

4.Application: It is the most ideal filler material of reburner , reacting furnace, filler furnace on oil and chemical industries.

4.是广大石油、化工业转化炉、反应炉、填料塔最为理想的填料。

5.The tubes are dumped in bulk into the hopper of a bottle unscrambler, which feeds them into an enclosed rotary volumetric filler.

5.该管的大量倾倒到漏斗的一瓶理瓶，其饲料成一个封闭旋转式容积装机。

6.The ultraviolet irradiated polypropylene (PP) with the oxygen polar groups on its chain was blended with the inorganic filler STC (Sericite-Tridymite-Cristobalite).

6.聚丙烯在室温、空气下,通过低能、短时间的紫外光辐照,在其分子链上引入了含氧的极性基团。

7.The vulcanization characteristics of a silicone rubber foam made by technology of removing inert filler used as foaming agent was investigated with curometer.

7.采用橡胶硫化了溶析成孔工艺制备的硅橡胶泡沫材料的硫化特性,分析讨论了硅橡胶的结构、成孔剂用量对硫化特性的影响规律。

8.Copper conductive adhesives were prepared using epoxy as matrix, the mixture of m-phenylenediamine and diaminodiphenylmethane as hardener, and copper particles as the conducting filler.

8.以环氧树脂为基体,间苯二胺和二氨基二苯甲烷的低融点混合物为固化剂,铜粉为导电填料,制备了热固化各向同性导电胶。

9.Filler retention and drainability of wheat shaw pulp could be improved remarkably when PAC and PDADMAC were added as ATC before the addition of CPAM.

9.用PAC和PDADMAC作为阴离子捕捉剂可显著改善麦草浆的滤水性，提高其留着率。

10.A series of reversible thermochromic paints were prepared using different kinds of inorganic compounds as filler,cresol red as chromophoric reagent and boric acid as delomorphic reagent.

10.以甲酚红为发色剂,硼酸为显色剂,选择不同的无机填料,制备出系列可逆热致变色颜料。

11.Results showed that the oil removal effect of lipophilic filler is better than lipophobic filler, and the treatment processes can obtain satisfactory treatment effect without using any chemicals.

11.结果表明,亲油性聚结填料的除油效果要好于疏油性填料,水温与聚结负荷对除油效率有较大影响。在不投加任何药剂的情况下,试验处理流程可将聚合物驱采油废水处理到理想效果。