1.He put the electric plug into the socket.

1.他把电插头插入插座。

2.The banks are threatening to pull the plug on the project.

2.银行威胁说停止这计划。

3.Where can I plug in my hairdrier?

3.我在哪里能接上吹风机的电源?

4.The coffee grains plugged up the kitchen drain.

4.咖啡渣堵塞了厨房的下水道。

5.The battery charger plugs into any mains socket.

5.这电池充电器可插入任何类型的电源插座。

6.Use this wad of cloth to plug the barrel.

6.用这软布把桶塞上。

7.The workers plugged the hole in the gas pipe.

7.工人们堵住了煤气管道上的洞。

8.There is a male plug.

8.有一插头。

9.I went down on one knee to plug in the vacuum cleaner.

9.我单腿跪下插上吸尘器插头。

10.She keeps plugging away at French.

10.她一直在拼命地学法语。

11.Whoops! Don't worry; just an electrical problem. One of the Kicky-Sack sack pickers will have to flick the plug.

11.哎呀！别担心；只是电出了点问题。需一工人去敲一下插头。

12.This article introduced the connecting manner and connecting standard in the network cabling of twisted-pair, moduling information outlet and moduling connector plugs.

12.介绍双绞线、模块化信息插座、模块化插头在网络布线中的接方式接标准。

13.When insert plug into socket and rotate steeve rounding plugright-handlers to certain angle,the switch is off,then the plug could be pull out.

13.反之，将转套向左旋转至一定的角度，则开关分断，然后才能拨掉插头。

14.Sungod spark plugs and implements Biological Tech Englineering Service (BTES);this is kind of biological engineering management mode meets the requirements of international traditions.

14.生物技术工程服务是我公司大力倡导并努力实行的一种符合国际惯例的生物工程建设管理模式。

15.The cleaner hereinabove should not leave the workplace with the key still plugging in the cabinet lock or in an unlocked drawer or the cabinet.

15.阿姨在离开工作场所时，不得将钥匙遗留在橱柜上或未锁的抽屉、橱柜中。

16.According to trichologist Philip Kingsley, hair plugs are not a new concept: they were first created in 1956 by an American dermatologist called Norman Orentreich.

16.据毛发学者菲利普·金斯利(PhilipKingsley)介绍，植发并不是一新概念，早在1956年，美国皮肤科医师诺曼·奥莱恩特赖奇(NormanOrentreich)便首先提出了这一概念。

17.Then there's my crowning glory, inelegantly referred to in the trade as “the plug,” the part man uses to erase the errors he makes with me.

17.然后就是我那至高无上的王冠，在该行业中被人很粗俗地称之“塞子”，就是人们用来擦除用我犯下的错误的那东西。

18.The purpose of the bulkhead is threefold: to seal the forward end of the motor, to retain the pyrogen igniter, and to act as a blowout plug in case of motor overpressurization (discussed earlier).

18.的目的，该舱壁是三方面：密封着年底汽车，保留热原点火器，并充当井喷堵塞在案件电机overpressurization （讨论较早者为准） 。