This pneumatic tool will double the speed of assembly.

这个工具可以把配速度提高一倍。

The machine mainly includes electromotor framework, dibbling mechanism, sowing mechanism, powered mechanism, pneumatic electric and PLC control panel.

该机主要由电机、机架、打洞、播种、传机构、、电及PLC控制等部分组成。

Anelectronic, pneumatic, or manual starting device is then used to allowprime mover starting and operation under ballhead control.

电，，或手起，然后用，让原机的出发点和运作下，ballhead控制。

The machine has double revolving table cutterbar, pneumatic compact, high precision of process and saw cutting at the same time.

双转台切割机，压紧，双锯头同时切割，加工精度高。

The conception model, assembly model and parts model of pneumatic hole impinger are established by the method of intelligent modeling.

采用智能产建模的方法,建立了潜孔冲击器的概念模型、配模型和零件模型。

Structure of pneumatic material c lamping device and pneumatic system have been introduced with ex-pounding appli cation in a notching press.

介绍对压的结构及系统,以及压在冲槽机上的应用。

With adoption of post processing of vacuum pneumatic conveying,the conveying cooling and purification of tripolycyanamide can be fulfilled at the same time,which t...

改用吸送式力输送后处理工艺后,既能输送,又能冷却、提纯三聚氰胺,实现自化包,并彻底改善工作环境。

In this paper,fluid mechanics was applied to analyze the flow field of swirling jet flow and guide the twisting and untwisting of pneumatic splice.

用流体力学分析旋转射流的流场，来指导流捻接的解捻与加捻。

It describes the designing, logic circuit, working principle and adjustment of the pneumatic rubber plate logic control system attached to the horizontal multiple-hollow-chisel mortiser.

详细阐明卧式多头打眼机膜片逻辑控制系统的设计,逻辑线路,工作原理及其调试。

This article is mainly about the characteristic and principium of automatic suberization dense-phase pneumatic conveying technology,and the experimental study in materiel transportation of PTA.

主要介绍了自成栓密相输送技术的特点及原理,介绍应用于对苯二甲酸物输送的试验研究。

It is composed of the XD-I vibroscope based on the string vibration and the XQ-I fibre tensile tester with pneumatic clamp operating and data processing function.

该仪器由按弦振原理设计的XD-1型振式细度仪及具有夹持操作及数据处理功能的XQ-1型纤维强伸度仪组成。

In the third part of the screen the residual water is pressed out of the sludge, at a minimum filter cake thickness, by the pneumatic counterpressure cone at the press discharge.

在屏的第三部分，淤泥上残余的水份通过压力排放的反锥被压出来，形成最低厚度的泥饼状物。