1.It has vanguard technology of friction welding and chroming and so on.

1.具磨擦焊接和镀铬先进生产工艺。

2.It's more automatable and easier to repair shafts using laser overlaying welding technology.

2.数控编手段的运用大大提高了工作效率 ,也降低了现场操作的难度。

3.Channel companies welding stainless steel processing various models, ranging from heterotypic edge angle.I-H-plasma processing.

3.公司焊接加工各种型号不锈钢槽钢，不边异型角钢，工字钢，H型离子加工。

4.To protect the power component of electric welding machine,overtension and undertension protection are circuit designed.

4.为保护焊机的功率器件设计了过压欠压电路。

5.The welding is so smooth that you can hardly see where the sections of pipe are joined together.

5.这管子焊接得很光滑,你很难看出什么地方是焊接的。

6.Has current preplacement, preview and arc starting current, arc force current regulation function, it makes welding operation easier.

6.具有电流预置预显和引弧电流、推力电流调节功能，使焊接操作更容易。

7.This article introduced field assembly of large-scale towers adopting jack,the welding of the shell,heat treating and hydrostatical test.

7.介绍了大型塔器现场采用千斤顶进行组对、焊接、热处、水压验,同时对如何解决塔段出现椭圆变形超标的问题进行阐述。

8.A high K ratio method for fatigue precracking in welding position toughness specimen of thick steel plate was developed.

8.提出了预制厚钢板焊缝断裂韧度样疲劳裂纹的“高K比法”。

9.Utilized this method to segmentalize the image of oil derrick arc welding robot welding line gets up the good effect.

9.将该方法运用于石井架弧焊机器人焊缝图象的识别中起到很好的效果。

10.It has properties of hardening after malleablization,arc welding and impact resistance.It can grind but can not machining demagnitized steel-bonded carbide.

10.具有加工硬化、电弧烛接和耐冲击的特性，可磨削但不可机械无加工磁性的钢结硬质金。

11.To the following surface treatment: sand blasting, oxidation, corrosion, laser carving, wholesale, laser welding, polishing, lampworking, PVD vacuum electroplating, oil-filled fonts.

11.能进行以下表面处: 喷砂,氧化,腐蚀,镭雕,批发,激光焊接,抛光,拉丝,PVD真空电镀,字体填.

12.Disposing welding section steel cross bridging in the slab-column system is a good means to avoid disposing abaci and elevating shear resistance.

12.设置型钢剪力架是避免设置柱帽和板托,同时有效提高板柱节点抗冲切承载力的最受欢迎的有效手段。

13.Double-frequency cipher can solve the problem of multimachine mutual interference fairly good by handling the remote control and autocorrection of welding current.

13.采用“双频密码”方式解决焊接电流的远调节及自动修正，较好地处了多机相互干扰问题。

14.The product production line uses Japan, Europe, US and so on specialized automated, the semiautomation welding apparatus, each kind of product automatic production.

14.产品的主要原料由国际和国内优质供应商提供，并配置了先进的实验设备和完善的检测手段，以保证产品的安全性和可靠性能。

15.The system uses PLC procedure control, start-up, forward or backward soldering gun, arc starting, workpiece circumgyration, etc full welding process all can complete automatically.

15.系统采用PLC序控制，启动、进退枪、引弧、工件旋转焊接全过均能自动完成。

16.The purpose of prebending process of longitudinal submerged arc welding pipe production line is introduced;character of roller prebending and mould press type prebending is analyzed.

16.对螺旋埋弧焊钢管在生产过中产生咬边的原因进行了分析,提出了针对这些原因应采取的相应措施。

17.The process of vacuum electron beam welding for rear-axle housing semiaxle of coach was introduced and the major problems in the process of welding was analysed.

17.介绍了用真空电子束焊接大型客车后桥壳半轴的工艺方法,并就焊接过中存在的主要问题进行了分析。

18.The welding machine has strong anti-electricity fluctuation ability,it is available to produce in small quantity.At the same time,further research should be held on accurancy accouplement.

18.得出该焊机抗电网波动能力强、可小批量生产，同时还应从精确匹配上进一步研究的结论。

19.On the basis of the characters of HG - II myriametre rail welder and thetechnological request of rail gas pressure welding in the field, a ra.

19.根据新技术标准和施工工艺特点,在客运专线铺轨基地建造了全自动的长钢轨焊接流水生产线,总结出了长钢轨闪光接触焊的施工关键技术。

20.Air hole, burnthrough, cooapse and welding crackle occurred in the fixed overhead weld for aluminium and aluminium alloy tubes, above all the small-size thin wall tube.

20.针对铝及铝金管,特别是小口径薄壁管固定口仰焊部位易出现气孔、烧穿、塌陷及焊接热裂纹问题,分析问题存在的原因,从焊接工艺方面入手,提出一套消除气孔及烧穿的操作手法。