6.With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.
7.(4)usint screw ring instead of circlip of circlip for locking the nozzle to eliminate the axial clearanec;
(4)用螺纹环取代卡簧锁紧喷嘴，以消除喷嘴的间隙；
8.(4)用螺纹环取代卡簧锁紧喷嘴，以消除喷嘴的间隙；
(4)usint screw ring instead of circlip of circlip for locking the nozzle to eliminate the axial clearanec;
9.Efficacy measures include axial length， keratometric power and mean absolute refractive error.
有效测量值包括眼度，角膜曲率和绝对屈光误差值等内容。
10.Objective: To discuss the axial image characters of spondyloschisis from vertebral articulations is the purpose of this article.
摘要目的：探讨腰椎椎弓峡部裂与椎间小关节在横断图像上的影像学特征。
11.Abstract:The exterior tube structure exerts radial outward forces, and the diagrid columns have significant difference in axial force.Both result in large axial tension forces in ring beams.
［摘要］重力荷载作用下网筒结构外鼓及交叉柱间力差异将使环梁受到较大的拉力。
12.Abstract: A two-gap drift tube buncher and a one-gap grid buncher with linear bunching waveform are used on the SFC axial injection line.
14.In general,the cylindrical roller bearings, belonging to axial discerptible bearing,are suitable only for sustaining radial loads.The contact of roller with race is linear.
圆柱滚子承一般只用于承受径负荷，滚子与套圈滚道为线性接触，属可分离型承。
15.The finite element models of axial tension member and eccentrical tension members are established with ANSYS finite element program.
16.Fracture characteristics of axial tension of RCC layer surface are studied experimentally by servohydraulic closed-loop testing machine in laboratory.
利用电液伺服式试验机对有层碾压混凝土试件进行拉断裂试验研究。
17.The elastic stiffness matrix of this new model is 14×14.The effect of axial force, shearing force, biaxial bending moment and bimoment was involved in the geometrical stiffness matrix of element.
该模型的弹性刚度矩阵为14×14矩阵，几何刚度矩阵中考虑了力、剪力、双弯矩和双力矩效应。
18.In order to achieve the fabrication of noninvolute beveloid gears with crossed axes by using the existing machine tools, the tooth profile errors and axial errors should be studied.
很多进口机械中应用了交错非渐开线变厚齿轮传动,目前国内在该领域的研究还是空白。
19.This paper introduces a new designing scheme for multi-axial drill machine to make the friction disk of automobile clutch,the structure of the machine and the principles of its cybernation.
介绍了汽车离合器摩擦片多钻床的设计方案、结构和控制原理。
20.By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.
心公路。
的
的;
的，横
;
压
度
】
片量
