punching

1.The process calculations such as layout chart of punching die for locatized plate, punching pressure, pressural center and etc.

分析了接线片的结构特点和冲压工艺性,介绍了零件的排样计方案、模具结构及主要特点。

2.I will have no one punching anyone else up in my hotel.

在我的旅馆里我不让任何人动手同别人打架。

3.The machine can automatically punch or continuously punch and rivet eyelets. The punching and eyeleting can be finished once.

该机具有单打或连续钉打鞋眼、冲孔、打眼一次自动完成。

4.And sometimes it's stale machismo, a tired belief that rock'n'roll is about getting drunk and punching journalists.

有候是因为老掉牙的男子气概、认为摇滚就是“烂醉+扁人”的陈腐念头。

5.In the thesis the author analyzes the current punching situation of keyseat and mark hole when making electric motor iron core;

分析了电机铁芯制造键槽、记号孔冲制的现状;

6.Later period is OKer, attack goes up still is very powerful, PK, carbon, upgrade, it is brunt artillerist, also be main punching bag of course.

后期就比较可以了，攻击一上去还是非常强大的，PK、副本、升级，都是主力炮手，当然也是主要攻击。

7.It consists of main decoiler, assistant decoiler, guide rack, foming machine, forming mould, flatting device, punching device, cutting-to-length, collection table, electrical control， etc.

备由主放料架、副放料架、导向机架、成型主机、成型模具、校正机构、冲孔机构、切断部分、收料台、电器控制部分等组成。

8.According to the tractility of Silicon steel sheet,a new processing technics of cutting the narrow-yoke sheet into punching piece and rolling it into motor core was proposed here.

文章根据硅钢片的可延展性,提出一种窄轭冲片套裁成形成冲片条,再盘卷成电机铁心的工艺方法。

9.High processing accuracy due to super precision linear motion pair adopted in mobbing parts. Used for corner punching and riveting combination of aluminum window and door.

同对门窗的两个角进行加工,加工效率高,采用柱塞式液压系统,噪音小,运行平稳。

10.This paper mainly discusses subjects such asprocessing,technology of pole coil wind ing,forming,manufacturing lead,punching,dove-tail groove,insulating,heat pr essing,encircling slot,etc.

本文主要研究了磁极线圈绕线、整型、引线制做、鸽尾槽冲制、绝缘、热压、围带槽加工工艺等方面内容。

11.Shall consist of clean, unalloyed, uncoated copper scrap clippings, punchings, bus bars, commutator segments and wire not less than 1/16 of the inch thick, free o burnt wire which is brittle;

此铜线要求是干净的，未经包裹的纯粹铜片、铜屑、汽车门闩、换向器切片，且铜线的厚度不少于1/16英寸，免烧易碎的铜线；