1.Injection-minded rotor magmata are available for clients.
并可为用户提供注塑完整的磁体。
2.Therefore, the stator and rotor and the vent was spinor into two parts.
因此，定的不退、排气口被和旋隔成两个局部。
3.One solution is to add a rotor position sensor to the synchromotor.
解决这一问题普遍的做法是加装电机位置传感器。
4.It is best to allow the rotor to rotate freely.
最好让自由旋。
5.A rotor from the engine makes the wheels of the car turn.
发动机的动。
6.the rotors are widely separated and do not interfere with one another.
旋翼相距很远，不会互相妨碍。
7.The stability of turbocompressor rotor bearing system is a very important problem.
透平压缩机轴承系统的稳定性是一个非常重要的问题。
8.The dynamic equation of the transient response in a cracked rotor system was modelled, the numerical simulation solutions of the uncracked rotor and the cracked rotor were obtained.
摘要基于建立的裂纹瞬态回应动力学模型，得到了有无裂纹的数值仿真解。
9.In Chapter 3, based upon the blade second-order lifting-line model and rotor free-wake model, an analytical method is developed for predicting the rotor wake structure and BVI airload.
10.Our company is specialized in producing RBB series of flexible rotor series of pumps, the pump is a self-suction pump of good volume.
我公司是专业生产RBB系列柔性糸列油泵，该油泵是一种自吸性能良好的容积泵。
11.Fireresistant Hall device and SmCo rotor is used to design position and speed sensor, and the corresponding doubling circuit and decoding circuit is designed.
12.A theory of aeroelastic stability of hingeless rotor blade in hover by using the Galerkin weighted residual finite element method is developed in this paper.
采用伽辽金加权余数有限元素法发展了一种悬停状态下无铰旋翼桨气弹稳定性的分析方法。
13.As the core component,rotor system may run abnormally,have the failures of unbalance,bearing damage and incorret alignment.
作为它的核心部件，系统运行过程中可能出现不平衡、不对中、轴承损坏等故障。
14.Based on this, the veracity of the rotor fault diagnosis can be improved through the distance of the information entropy curve chart at the multispeed.
15.Stepped and staggered sidecutter is the special miller for machining root rotor slot by Beijing Beizhong Steam Turbine Generator Co.
台阶错齿三面刃铣刀是北京北重汽有限责任公司加工根槽的专用铣刀。
16.The rotor is then heated and pressfit onto a cooled precision-machined one-piece stainless steel shaft and the assembly is then machined and balanced as a unit.
经过加热后压入配合进经过冷精密加工的一体式不锈钢轴内，然后机械和平衡设备装配成一个整体。
17.The new type of rotary compressor has two key parts, an outer rotor and an inner one which employs isometric curve of trochoid as its profile.
从理论上分析了一种新型内、外结构回式压缩机,其内型线由短幅外摆线的内等距线构成。
18.A detailed explaination is made on rational assortment of bourette silk, ramie, wool andchemical fibres for the purpose of improving rotor spun yarn quality.
19.Fitting is used for autobicycle start electrical machiney, Car forced convection air heater, Electric tool electrical machiney waits for miniature electrical machiney rotor slot insert empire paper.
;
，刀锋;
磁体。
机
