technics

The technics parameters wereoptimized through chiasmus.

对合成工艺参数进行正交设计和优化。

This paper investigated the technics of chlorophyll abstraction from spinage and the synthesis of chlorophyllous zinc sodium.

摘要文章研究从天然植物中提取叶绿素的方法和叶绿素锌钠盐制备的工艺。

Its main parts was the half-calotte Metal-Rubber manufactured by the new technics of facture and advanced mold.

限位器主要构件沿帽的半球壳状金属橡胶件。

The key technology and technics,which use Simons electrolyze trough with a falcial anode to synthesize lithium fluoroalkylphosphates,are discussed in this paper.

本文探讨采用以镍板阳极的西蒙斯电解槽电解氟化制备氟烷基膦酸锂的有工艺和键技术。

Finally, wirebonding technics in the retral packaging of Schottky power diodes is optimized by orthogonal experiment design.

最后用正交试验的方法对肖特基器件后部封装中的压焊工艺进行参数优化设计。

The artical detailedly reviews the adhibition of three both series hydrolyze technics in the furfural production and the merit of economize energy resources and increase production.

本文详细叁双串联水解工艺在糠醛生产中的应用以及其节能、增产等优点。

Through the practical production use,the new technics furnishment can satisfy the need of three-throw crankshaft p...

通过实际的现场使用,能够完全满足三拐曲轴的加工要求,取得良好的效果。

The article recommends the technique arguments of the wafery excavator and the technics of building antiseep concrete wall using by it.

摘要介绍薄型抓斗的技术参数及薄型抓斗建造混凝土防渗墙的主要施工工艺。

On the base of it , analyzing the technics of the Hydramine method, To give the material suggest in the selection of the absorbent of multi-hydramine and selecting the technics.

在此基础上，对醇胺吸收法的工艺流程进行分析，给出具体工艺配置的建议。

Then by studying CG125 left crankcase of motorbicycle technics and equipment.The technology nodus adopt reverse boring cutter technics.

通过对摩托车CG125曲轴箱左体工艺及装备进行研究,论文提出用反镗技术解决难点;

Although PM has solved the problem of carbide segregation and crassitude fundamentally, it has complicated technics and extortionate cost, so restricts its application.

粉末冶金虽然从根本上解决碳化物偏析和粗大的问题，但其工艺复杂，成本过高，应用受到限制。

According to the tractility of Silicon steel sheet,a new processing technics of cutting the narrow-yoke sheet into punching piece and rolling it into motor core was proposed here.

文章根据硅钢片的可延展性,提出一种窄轭冲片套裁成形成冲片条,再盘卷成电机铁心的工艺方法。