annealing

1.It also suggests some ways to improve the techniques of acid cleaning, bonderizing, annealing and deformation.

并提出了改进酸洗、磷化、火及变形工艺的方法。

2.for case hardening respective decarbonizing respective bright annealing of long rod,bars and or wire bundles.

适于长条料、棒材或金属线包的表面渗碳、脱碳、光亮火。

3.It is established the evaluation method of annealing detergence for copper rolling oil by simulating industrial program with thermogravimetric analyzer.

用热重分析仪模拟工业火程序,建立了铜轧制油火清净性的评价方法。

4.According to the user may also need to reprovision bright annealing line, the pressure of the entire park, and other sewing aids.

还可根据用户需要另配在线光亮火，内压缝整园等辅助。

5.Also, High electric field annealing of stressed PMOSFET and detrapping of trapped electrons on the gate oxide are studied deeply.

重点研究了化PMOS器件的高场火效应和氧化层陷阱电子的陷阱机制。

6.I conclude that the increase of detwinning stress with annealing temperature results from the surface hardening of the sample due to surface oxidation;

由此实验现象可以得出结论，文献报道的去孪晶应力随着火温度升高而升高的现象是由于样品表面氧化造成的。

7.AAO is transforming noncrystal to crystal after annealing in 850℃,1000℃,1160℃.The range of utilization is increasing from the pH 5-10 to 2-13.

在对氧化膜在850℃，1000℃，1160℃的条件下进行热处理后，氧化膜由非晶态向晶态转变，而且在水溶液中应用范围也由pH值5-10扩大到2-13。

8.They include laser doping, laser annealing, laser depositing film, solid-phase reaction induced by laser and laser photolithograph.

这些应用大致涵盖激光掺杂、激光火、激光沉积薄膜、激光引发固相反应和激光光刻等几方面。

9.It was reported that the detwinning stress in martensite of Ti-Ni alloys increases with increasing annealing temperature, but the reason for such a strange behavior has remained unclear.

有报道称Ti-Ni合金的去孪晶应力随着火温度的升高而升高，但是造成这一现象的原因并不清楚。

10.Welds makes up in the process the substrate not to give off heat, not to distort, the unstressing, does not have the hard spot and the annealing situation.

世界第一台铸造缺陷修补机的研制成功，给铸造缺陷修复带来了一次彻底革命！焊补过程中基体不发热、不变形、无应力、无硬点及火情况。