2.The result of this shearing force is to push the endoplasm forward.
这种剪切作用结果是推动内质向前。
3.The farmer is shearing his sheep.
那农夫正在给他羊剪毛。
4.The thermal depolymerization of crumb rubber–asphalt system could be controlled by using the coadjustment of shearing temperature and shearing time.
可以通过剪切温度和剪切时间互补关系实现可控降解。
5.Splitting and bandknife shearing machines.
英文名称: Tannery machines.
6.The chink section of relative rest must be taken as the reference datum of shearing leakance direction.
剪切泄漏方向以缝隙中相对静止断面为参照基准;
7.It is suitable for shearing lap of cotton and man-made fire flat ruche and filling-knit fabric.
本机适用于将棉、化纤经、纬毛卷剪开。
8.Furthermore, the relation of fabric drapability and stretching-length, flexual modulus and shearing modulus is also discussed.
初步研究了伸出长度、弯曲刚度、剪切刚度对静态悬垂系数影响。
9.Two main bolted-Flange connections,kingbolt connection and shearing bolt connection were compared.
比较了两种主要螺栓———法兰连接结构-主螺栓连接和剪螺栓连接在结构方面特点;
10.rectangular blades with four cutting edges to prolon working life, adjustable shearing angle to reduce deformation of the sheet.
矩形刀片,四个刃口均可使用,使用寿命长。剪切角可调,减少板料扭曲变形。
11.From the angle that the energy of an explosive is used for shearing and crushing of a medium, the charge weight per blasthole is calculated.
从炸药能量主要用于介质剪切、破碎角度,计算单孔装药量。
12.Biology reshaping of implant can obtain a faster osseointegration bigger area of synosteosis and stronger anti-shearing force.
种植体表面生化学改性,能获得更快骨整合,更大骨结合面积,更强剪切。
13.The elastic stiffness matrix of this new model is 14×14.The effect of axial force, shearing force, biaxial bending moment and bimoment was involved in the geometrical stiffness matrix of element.
该模型弹性刚度矩阵为14×14矩阵,几何刚度矩阵中考虑了轴、剪、双向弯矩和双矩效。
14.The manufucture and processing conditions of single colour, bicolour effect, snow top effect, breeze effect, printing fur from sheep shearing skin were summarized systematically.
FSM series shear pump: For solid-liquid or colloid-liquid, can be mixing, shearing, emulsible and homogenizing.
16.The unit is composed of hydraulic and double conic placing,hydraulic spading and drawing ,straightening,shearing,end stopping,coiling,feeding,dropping cart,ect.