sinter

1.Two technologies of sintering municipal sewage sludge for manufacturing haydite ("wet process granulation-sintering" and "anhydration-sintering") were studied.

通过试验比较了“湿法造粒-烧结”和“干化-烧结”2种利用城市生活污泥烧结制陶粒的工艺路线。

2.A new type of burnt lime slaker have been developed by LAIGANG sintering plant.

莱钢烧结厂研制了一种新型的生灰消化器。

3.Modified polyacrylic acid aqueous vehicle may be the headmost applied in electronic pastes of high sintering temperature.

其中改性聚丙烯酸将有可能在高温电子浆料中率先应用。

4.The effects of sintering parameters on the shear and bond strength of ceramet friction material were studied and its fracture morphology was observed and analyzed.

研究了烧结工艺参数对金属陶摩擦材料抗剪强度和金属陶摩擦片结合强度的影响,观察并分析了断口形貌。

5.The author introducd the electric equipment design of ore smelting eutecticum engineering of ore sintering plate, stated the problemes and the countermeasures.

介绍了冶共晶工程烧结车间的电气设计,并阐述了设计遇到一些问题以及解决的方法。

6.Sinter type fastigiate-handle drills:Use for drilling hard and brickle material,...

简 介: 烧结锥柄钻头：适用于玻璃、陶等硬性材料的钻孔。

7.A white powder,coarse particles and mealiness ,hardly souble in acidic or alkaline solutions,with stable chemical property and good sintering performance.

外观呈白色粗颗粒或微粉状两种，难溶于酸或碱液中，化学性能稳定，具有良好的烧结性能。

8.Addition of partial nephelite during bauxite sintering could not only make up consumption of soda, but also attain purpose for treating nephelite.

在铝土烧结过程中添加部分,以补充碱的消耗,同时达到处理的目的。

9.Semelles de frein en matériaux frittés.Railway rolling stock.Brake shoe inserts made of sintered materials.

铁路车辆.焙烧材料制的制动瓦镶嵌件Matériel roulant ferroviaire.

10.The process conditions,including presintering temperature,sintering temperature and time,cooling mode and pretreatment were studied.

对烧成过程(预烧温度、烧结温度及保温时间、降温方式)及预处理工艺进行了研究。

11.The solid fuel consumption of sinter has been decreased greatly through insisting on using high quality calces,practising high feed sintering,actualizing many techniques in solving key problems.

烧结坚持用好生灰,推行厚料层烧结,实施多项技术攻关,固体燃耗大幅度下降;

12.The obtained achievement in building material industry is studied, including sintering cement with substituting coal by cokeite and smelting rockwool with substituting coke by cokeite and so on.

本文介绍了采煤副产品～天然焦的特性，并对其在建材行业的开发研究成果进行了评述．主要包括天然焦代煤烧制水泥，天然焦代焦炭制岩棉等。

13.Various technical modification items, such as secondary mixing drum,muticyclone,preheating manner of mixture,single-roll crusher, loosener etc,in the major repair of sinter plant , Panzhihua I&S Co.

本文介绍攀钢炼铁厂1号烧结机大修对烧结机系统进行的多项技术改造，包括：二次混合机、多管除尘器、混合料预热方式、单辊破碎机、松料器等。

14.The metal reflet glaze samples were prepared with the Huxian wheat-meal-stone accession 0%, 5%, 10% and 15% according to the traditional metal reflet glaze formula and then sintered at 950%.

摘要在金属光泽釉配方基础上，制作了4组户县麦饭添量为0%，5%，10%，15%的金属光泽釉试样，在950℃温度环境下烧成。

15.Using dolomite and sinter magnesia clinker as a main material and added with alkali metal phosphate binder and additives,amagnesia-calcia coating material has been developed.

采用白云配以适量的镁砂熟料和磷酸盐结合剂及复合外加剂研制出了具有较好性能的镁钙质中间包涂料。

16.For sinter with 25% and 50% MAC fines the iron oxides mainly consisted of hematite and magnetite, the bonding phase were mainly dicalcium silicate, glassiness, and a few amount of calcium ferrite.

配比为25%和50%的两种烧结中铁氧化物均以赤铁、磁铁为主，粘结相主要以铁酸钙、硅酸二钙和玻璃质为主，但铁酸钙数量不多。

17.The color of the products is argent grey metallic shine, smooth, unknit. They mustn't be oxydic badly, lacking of sintering, over heating, delamination and cracking.

产品表面呈银灰色金属光泽、光滑、平整、不得有严重氧化现象，不得有欠烧、过、鼓泡、分层、裂纹等缺陷。

18.The mesh belt is most frequently used in the automatic assembly lines of color display tube、powder metallurgy products、sintering glass product、food industry、quickfreeze device、garbage disposal etc.

此网带为最常用网带广泛应用于彩色显像管的流水线，粉末冶金制品烧结玻璃制品、食品工业、机械速冻装置、垃圾处理等自动化线。

19.The moisture analyzer of high-speed weight loss type was used to measure and forwardfeed-backfeed control to control the moisture content of sintering mixture on line.

采用快速失重式水分仪在线检测烧结混合料水分的含量;